This page contains charts and visual aids that will help in customizing orders for lace wigs and hair units.
Your new hair will soon become a part of who you are, so please make careful choices for hair coloring, density, texture, and lace
color. Devote extra attention to taking head measurements accurately, which is the most important specification for assuring that your
lace unit will fit properly.
To ensure that your new hair will look the way you've envisioned, contact Ms Lola if you have any questions or concerns at any stage
of filling out the order forms.
Your new hair will soon become a part of who you are, so please make careful choices for hair coloring, density, texture, and lace
color. Devote extra attention to taking head measurements accurately, which is the most important specification for assuring that your
lace unit will fit properly.
To ensure that your new hair will look the way you've envisioned, contact Ms Lola if you have any questions or concerns at any stage
of filling out the order forms.
| CHART 1: Measuring instructions for frontals (#1 and #2 measurements only) Measuring instructions for half wigs and 3/4 wigs (#1, #2, and #3 measurements) |
Measuring instructions for full wigs ONLY
| Before measuring, press your hair as close to your head as possible by either braiding or wrapping it, then cover with a wig cap. |
1. Measure your head Circumference with a tape measure around your hairline.
Circumference: Place the tape flat against your forehead at your hairline and wrap around your head. The tape should rest behind
your ears and also sit on the nape of your neck.
2. From Forehead to Nape of Neck.
Front to Nape: This measures the length of your head from the front to the nape of your neck. To determine where the nape of
your neck is, tilt your head back and look up. Where your neck bends and may even develop a skin fold, is where your nape is. You
want the bottom of the wig to sit right above this area so that when you do tilt your head back that far, your wig will not shift on
your head. This area is often right at the occipital bone, but be sure to take the measurement with your neck bent down so that
you are looking at your shoes. Starting at the front hairline, measure directly across the middle top of your head to the area that
you have determined is your nape.
3. Ear to Ear Across Front Hairline.
Temple to Temple across Front: This measures your temple to temple length for tape tab placement. Place tape at your temple,
just in front of your ear, bring tape up towards the top of the head and go 1.5 inch behind the front hairline, down to the
opposite temple in front of the opposite ear.
4. From Ear to Ear Over Top of Head.
Ear to Ear Across Top of Head: This measures your head for the top of the wig base. Place tape against your head at the top edge
of your ear and go directly across the top of your head to the top edge of the opposite ear.
5. Measure from Temple to Temple Around the Back of Head.
Temple to Temple Around the Back of the Head: Place tape against your head at the front edge of the hairline (sideburn area) in
front of the ear, go around the head above the occipital bone to the opposite front edge of the hairline.
6. Nape of Neck: The measures the width of your neck. Place tape at the lowest point on the bone behind your ear (mastoid bone)
and measure across the neck to the opposite mastoid bone.
Circumference: Place the tape flat against your forehead at your hairline and wrap around your head. The tape should rest behind
your ears and also sit on the nape of your neck.
2. From Forehead to Nape of Neck.
Front to Nape: This measures the length of your head from the front to the nape of your neck. To determine where the nape of
your neck is, tilt your head back and look up. Where your neck bends and may even develop a skin fold, is where your nape is. You
want the bottom of the wig to sit right above this area so that when you do tilt your head back that far, your wig will not shift on
your head. This area is often right at the occipital bone, but be sure to take the measurement with your neck bent down so that
you are looking at your shoes. Starting at the front hairline, measure directly across the middle top of your head to the area that
you have determined is your nape.
3. Ear to Ear Across Front Hairline.
Temple to Temple across Front: This measures your temple to temple length for tape tab placement. Place tape at your temple,
just in front of your ear, bring tape up towards the top of the head and go 1.5 inch behind the front hairline, down to the
opposite temple in front of the opposite ear.
4. From Ear to Ear Over Top of Head.
Ear to Ear Across Top of Head: This measures your head for the top of the wig base. Place tape against your head at the top edge
of your ear and go directly across the top of your head to the top edge of the opposite ear.
5. Measure from Temple to Temple Around the Back of Head.
Temple to Temple Around the Back of the Head: Place tape against your head at the front edge of the hairline (sideburn area) in
front of the ear, go around the head above the occipital bone to the opposite front edge of the hairline.
6. Nape of Neck: The measures the width of your neck. Place tape at the lowest point on the bone behind your ear (mastoid bone)
and measure across the neck to the opposite mastoid bone.
| CHART 2: Indian Remy Hair Textures Unless Otherwise Described If you would like to preview hair textures in person before placing your custom wig order, human hair swatches of the textures below are now available for purchase in our online store. |
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| HAIR LENGTH |
PLEASE READ CAREFULLY SO YOU WILL UNDERSTAND HOW HAIR WILL BE VENTILATED FOR YOUR WIG.
All wigs are produced in long layered styling. In other words, the hair will be 3 different lengths. For example if you request a 16-inch
wig, 30% will be 12 inches (front of wig), 30% will be 14 inches (half crown and sides), and 40% will be 16 inches (back crown and
bottom of wig). Other lengths are measured like this too, in 2-inch increments.
If you want the same length hair all over the wig, specify "Full Length" on the order form. You will be charged for a 4-inch longer wig
because it takes longer hair to make the overall wig one length. For example, if you request 16-inch "Full Length" hair, you will be
charged for a 20-inch wig.
If you do not understand about this pricing for hair lengths, please contact Ms Lola prior to submitting your order form.
All wigs are produced in long layered styling. In other words, the hair will be 3 different lengths. For example if you request a 16-inch
wig, 30% will be 12 inches (front of wig), 30% will be 14 inches (half crown and sides), and 40% will be 16 inches (back crown and
bottom of wig). Other lengths are measured like this too, in 2-inch increments.
If you want the same length hair all over the wig, specify "Full Length" on the order form. You will be charged for a 4-inch longer wig
because it takes longer hair to make the overall wig one length. For example, if you request 16-inch "Full Length" hair, you will be
charged for a 20-inch wig.
If you do not understand about this pricing for hair lengths, please contact Ms Lola prior to submitting your order form.
| CHART 3: HAIR DENSITY |
| CHART 4: Hair Coloring |
Coloring Techniques That Can Personalize Your Wig Or Hair Unit Even More:
want highlights.)
2. Evenly Mixed or % Mixed Coloring: Mixing two or more colors will subtly or dramatically change the color of your wig to a
totally new color. The mix color density that you select will determine the percentage of mix color(s) added to the base color.
3. 2-Tone Coloring: Roots are one color: Hair shaft is a different color. You can also have roots one color and have the shaft
mixed with one or more colors.
If you have questions about color combinations, please ask them in the 'Comments' box at the end of the order form. Ms Lola
will contact you either by phone or reply email with answers or suggestions.
want highlights.)
2. Evenly Mixed or % Mixed Coloring: Mixing two or more colors will subtly or dramatically change the color of your wig to a
totally new color. The mix color density that you select will determine the percentage of mix color(s) added to the base color.
3. 2-Tone Coloring: Roots are one color: Hair shaft is a different color. You can also have roots one color and have the shaft
mixed with one or more colors.
If you have questions about color combinations, please ask them in the 'Comments' box at the end of the order form. Ms Lola
will contact you either by phone or reply email with answers or suggestions.
can make many new colors and combinations from these colors. Human hair swatches of these colors are now available for purchase in our online store if you would like to preview hair colors in person before placing your custom wig order. |
|
| CHART 5: Highlights and mixed coloring |
add more than two colors for an additional charge. If you want more than two colors, please indicate your choices in the comments field on the order form. |
| CHART 6: Lace Material (Highly Magnified) |
| CHART 7: Lace Color |
| Chart 8: Wig Styles |
Freestyle Wigs are produced with all hairs ventilated away from the face. This wig style can be easily parted anywhere throughout
the cap for unlimited styling capabilities.
the cap for unlimited styling capabilities.
Non-Freestyle Wigs are produced with partings and other directional styling. This wig style usually retains this styling pattern after
shampooing. Celebrity Styles and customer submitted styles are Non-Freestyle Wigs.
shampooing. Celebrity Styles and customer submitted styles are Non-Freestyle Wigs.
| Please Note: If you select a Celebrity style on your order form, DO NOT select "Freestyle Wig". |
| CHART 9: Cap Design |
Full Lace Cap: This cap design offers complete
transparency. A full perimeter bond is required. Hair
can be parted anywhere and worn in a high ponytail.
Does not offer extra stretch. We suggest that you add
1/2 inch to measurements #1, #2 and #5 for a better
fit.
transparency. A full perimeter bond is required. Hair
can be parted anywhere and worn in a high ponytail.
Does not offer extra stretch. We suggest that you add
1/2 inch to measurements #1, #2 and #5 for a better
fit.
Full Lace Cap With Stretch &
Adjustable Back Straps:
This cap design offers complete
transparency. A front hairline bond
is required only. Back straps are
adjustable to customize individual
fit. Does not offer stretch except
in the back. Measurements must
be exact for a proper fit. Can not
wear high ponytails with this cap
design.
Adjustable Back Straps:
This cap design offers complete
transparency. A front hairline bond
is required only. Back straps are
adjustable to customize individual
fit. Does not offer stretch except
in the back. Measurements must
be exact for a proper fit. Can not
wear high ponytails with this cap
design.
Lace Cap With Ear to Ear Stretch Panel:
This cap design offers partial transparency. Bonding is
not required behind the ears. Hair can be parted
anywhere and worn in a high ponytail. Offers extra
stretch for all 6 measurements if they are not exact.
This cap design offers partial transparency. Bonding is
not required behind the ears. Hair can be parted
anywhere and worn in a high ponytail. Offers extra
stretch for all 6 measurements if they are not exact.
Lace Cap With Crown Stretch Panel:
This cap design offers partial transparency. Full perimeter
bonding is required. Hair can be parted anywhere and worn
in a high ponytail. Offers extra stretch for measurements #2
and #5 if they are not exact. Other four measurements should
be exact.
This cap design offers partial transparency. Full perimeter
bonding is required. Hair can be parted anywhere and worn
in a high ponytail. Offers extra stretch for measurements #2
and #5 if they are not exact. Other four measurements should
be exact.
Full Lace Cap With Ear Stretch Tabs:
This cap design offers full transparency. Adhesive is not
required for bonding behind the ears. Hair can be parted
anywhere and worn in a high ponytail. Does not offer extra
stretch. We suggest that you add 1/2 inch to measurements
#1, #2 and #5 for a better fit.
This cap design offers full transparency. Adhesive is not
required for bonding behind the ears. Hair can be parted
anywhere and worn in a high ponytail. Does not offer extra
stretch. We suggest that you add 1/2 inch to measurements
#1, #2 and #5 for a better fit.
Lace Cap With Thin Skin Perimeter:
This cap design offers partial transparency. Has a
thin 1.5" polyurethane panel around the entire
hairline. Offers stretch in the crown area. Requires
full perimeter bonding. Hair can be worn in high
ponytails with this cap design.
This cap design offers partial transparency. Has a
thin 1.5" polyurethane panel around the entire
hairline. Offers stretch in the crown area. Requires
full perimeter bonding. Hair can be worn in high
ponytails with this cap design.
Full Lace With Mono-filament Crown Top: This cap
design offers complete transparency with a sheer,
light-weight Polypropylene panel on the crown to achieve
natural partings for realistic scalp appearance.
Measurements must be exact for a proper fit, as cap does
not stretch. Hair can be worn in a high ponytail.
design offers complete transparency with a sheer,
light-weight Polypropylene panel on the crown to achieve
natural partings for realistic scalp appearance.
Measurements must be exact for a proper fit, as cap does
not stretch. Hair can be worn in a high ponytail.
| Full Lace With Silk Top: This cap design offers complete transparency with a silk insert applied strategically on the crown to achieve natural partings for realistic scalp appearance. Measurements must be exact for a proper fit, as cap does not stretch. Hair can be worn in a high ponytail. |
| CHART 10: Bleached Knots |
The technique that we use to minimize the appearance of the knots is called bleaching. Bleaching the knots of wigs and
hair units lighten the knots so that the hairs blend with the lace and look like natural hairs growing from the scalp.
The above diagrams show single knot ventilation before and after the bleaching process. Many wig companies charge extra
for this service. Ms Lola adds bleach knots free of charge.
Please Note: Bleached knots on your wig may not be exactly as the ones pictured. The degree to which knots are
lightened depends on the hair color and lace color. If knots are bleached too light, hair will shed excessively from wig.
hair units lighten the knots so that the hairs blend with the lace and look like natural hairs growing from the scalp.
The above diagrams show single knot ventilation before and after the bleaching process. Many wig companies charge extra
for this service. Ms Lola adds bleach knots free of charge.
Please Note: Bleached knots on your wig may not be exactly as the ones pictured. The degree to which knots are
lightened depends on the hair color and lace color. If knots are bleached too light, hair will shed excessively from wig.
| Wig Parties |
MsLola.com
| look your best at every age |
| Lace Frontal Foundation: This cap design offers complete transparency for realistic scalp partings. Has a reinforcement strip around the entire lower edge for optional clip attachment or weaving onto tracks. Also has three reinforcement seams around the front hairline. |
| Half Wig Foundation: This cap design offers complete transparency for realistic scalp partings. Has a reinforcement strip around the entire lower edge for optional clip attachment or weaving onto tracks. |
